All values measured to ground unless otherwise noted
Conn./Plug/Pin Pin Information Test Value Comments
A2/6      
1.1 Main ground to W6/1 Approx. 0 Ohms to ground  
1.2 Pin not used    
1.3 Circuit 58d input, "Dimmed Instrument Illumination" voltage Varies from 0.5-12 VDC, depending on setting of dimming value
Parking lights on: Radio buttons illuminated
Radio on: radio buttons and display illuminated
Feed from Instrument Cluster (IC)
1.4 Circuit 30 power input 12 VDC all times Feed from fuse F4f16
1.5-10 Pins not used    
2.1 Left audio signal plus output CD mode on > 0.2 VAC to pin 2.3  
2.2 Left/right audio signals common ground Approx. 0 Ohms to ground  
2.3 Left audio signal minus output CD mode on > 0.2 VAC to pin 2.1  
2.4 Right audio signal plus output CD mode on > 0.2 VAC to pin 2.5  
2.5 Right audio signal minus output CD mode on > 0.2 VAC to pin 2.4  
 
2.6
2.7
2.8
Audio data bus
high signal
low signal
ground
No reliable test
Radio on approx. 1 VAC
shares data with tuner/amplifier
3.1 Left audio signal plus input CD mode on > 0.2 VAC to pin 3.4  
3.2 Left/right audio signals common ground Approx. 0 Ohms to ground  
3.3 Right audio signal plus input CD mode on > 0.2 VAC to pin 3.5  
3.4 Left audio signal minus input CD mode on > 0.2 VAC to pin 3.1  
3.5 Right audio signal minus input CD mode on > 0.2 VAC to pin 3.3  
 
3.6
3.7
3.8
Audio data bus
high signal
low signal
ground
No reliable test
Radio on approx. 1 VAC
shares data with tuner/amplifier
Note 1 Refer to D. M. Info./Comm. Vol. 2, 6.1