GF07.61-P-0001-06A | Motor electronics (ME-SFI) fuel injection and ignition system control unit input signals |
P07.61-0570-09 |
Shown on Engine 112
A1 Instrument cluster A16G1 Knock sensor 1 (right side of engine) A16G2 Knock sensor 2 (left side of engine) B2/5 Hot film mass air flow sensor (intake air temperature sensor integrated) B4/3 Fuel tank pressure sensor B6/1 Camshaft Hall sensor B11/4 Coolant temperature sensor B28 Pressure sensor( only , with cylinder shutoff or with ME 2.8 as of 06/00) B37 Accelerator pedal sensor B40 Oil sensor (oil level, temperature and quality) G3/3 Left O2 sensor upstream of TWC G3/4 Right O2 sensor upstream of TWC G3/5 Left O2 sensor downstream of TWC G3/6 Right O2 sensor downstream of TWC |
L5 Crankshaft position sensor M16/6 Throttle valve actuator N3/10 Motor electronics control unit N15/3 ETC (electronic transmission control) control unit (only AT) N19 AC control and operating unit N22 Automatic air conditioning (KLA) control and operating unit N47-1 ASR/SPS control unit N47-5 ESP / SPS <ESP / PML control unit N54/1 DAS control unit N73 Electronic ignition switch control unit (with DAS 3) S9/1 Stop lamp switch S16/10 Transmission range recognition switch S40/3 Clutch pedal switch (MG) S40/4 Variable cruise control (CC) switch ( : S40 Cruise control switch) |
A Voltage supply, circuit 87 and 30 Model 202, 208, 210: K40/4 Fuse and relay module Model 215, 220, 230: K40/7 Right fuse and relay module Model 163: F1 Fuse and relay module Model 203, 209, 211N10/1: Front SAM control unit with fuse and relay module. Model 211: N10/1 Driver-side SAM control unit with fuse and relay module CAN b Engine CAN CAN C Interior CAN |