GF07.61-P-3031F | Correction programming function | 10.7.96 |
|
P07.61-2558-05 |
087 Hand-Held Tester HHT or STAR DIAGNOSIS
094 Multiplex cable K1/6 Electronics relay (model 168) K40 Relay module (model 170, 210 up to 2/97) K40/4 Fuse and relay module (model 202, 208, 230, 210 as of 2/97, model 163 with designation F1, model 215, 220 with designation K40/7) N3/4 HFM-SFI [HFM] control unit |
N3/5 ECM control unit (up to 08/01)
N3/10 ME-SFI control unit N3/18 ECM control unit with throttle valve actuator (as of 09/01) N16/1 Base module (model 129, 140) X11/4 Data link connector CAN Data bus |
With the correction programming it is possible to activate
different maps of the engine management system in the engine control unit. The coding is performed with the Hand-Held Tester (HHT) or with STAR DIAGNOSIS. The following maps can be influenced: Ignition maps for adapting to different fuel quality (except ) Mixture maps for enriching the fuel/air mixture in different operating states (except ) |
Idle speed on automatic transmission and engaged selector lever position
CO setting on models without TWC (except ) Fault setting conditions for rendering smooth operation identification less sensitive Cylinder shutoff threshold (on engines fitted with cylinder shutoff) |
Motor electronics control unit, location/task/design/function | GF07.61-P-5000F |