GF15.15-P-3101-02L

Structure of an ignition module

N92/1 ECI ignition module, right bank of cylinders
N92/2 ECI ignition module, left bank of cylinders

P15.10-2045-11

Electrical structure:
Printed circuit board with discrete components (condensers, resistances etc. ), microchip and ion current evaluation filter. Oscillating circuit with control and regulating circuit for the ignition output stages.
Switching-over between the 180 volt main voltage and the auxiliary voltage (about 23 volts). Mechanical structure:
An aluminium die cast housing with plastic cover. An ignition module for 6 cylinders with 12 ignition coils integrated into the spark plug sockets.

Only remove and install strictly according to manufacturer's instructions in order to avoid damaqe to the die cast housing!

There are seals in the spark plug socket (1) to protect the ignition coils.

The seals (1) should be replaced every time the ignition coil is removed
and installed again.

The spark plug connectors cannot be removed.

P15.10-2044-01

N92/1 ECI ignition module, right bank of cylinders N92/2 ECI ignition module, left bank of cylinders
		P15.10-2045-11

There are seals in the spark plug socket (1) to protect the ignition coils. The seals (1) should be replaced every time the ignition coil is removed and installed again. The spark plug connectors cannot be removed.
		P15.10-2044-01