MODEL 215 as of 1.10.02

P80.61-2126-09

1 Driver's door pneumatic actuator 2 Passenger door pneumatic actuator 6 Fuel filler flap pneumatic actuator 5 Remote trunk opening pneumatic actuator A2/12 Rear window antenna amplifier module A8/1 Transmitter key A37 Pneumatic control unit (combined) CAN Controller area network

E1e5 Left turn signal lamp E2e5 Right turn signal lamp E3e1 Left turn signal lamp E4e1 Right turn signal lamp E6/5 Left outside mirror turn signal lamp E6/6 Right outside mirror turn signal lamp N69/5 Keyless go control module N70 Overhead control panel control module N73 Electronic ignition switch control unit N80 Steering column module S Actuation of turn signal lamps through corresponding control modules S62/21 Trunk lid keyless go button

Model 220 3 Left rear door pneumatic actuator 4 Right rear door pneumatic actuator A2/38 Left front door keyless go antenna S47s2 Left front door push contact Model 215 A2/38 Left door keyless go antenna S47s2 Left door push contact

Lock Requirements: Circuit 30 All doors are closed. At least one transmitter key (A8/1) is located outside the vehicle At least one transmitter key (A8/1) is near (<1.5m) an inductive antenna Possible control elements for system activation: Actuate door handle switch Actuate trunk lid keyless go button (S62/21) Function sequence using driver's door as an example 1 The left front door push contact switch (S48/s2) is actuated by pressing the door handle button on the driver's door. The keyless go system is woken up. 2 The keyless go control module (N69/5) transmits a signal to the transmitter key (A8/1) via the left front door keyless go antenna (A2/38) The position of the transmitter key (A8/1) in relation to the vehicle is determined via various antennasTransmitter key in the vehicle or in the trunk are ignored

3 The transmitter key (A8/1) transmits its authorization This authorization is received by the HF antenna and is relayed to the keyless go control module (N69/5) via the overhead control panel control module (N70) 4 The keyless go control module (N69/5) checks whether the transmitter key (A8/1) is authorized for the vehicle 5 Transmit access authorization code to EIS control module (N73). 6 If access authorization code is correct, the signal "Open CL "is stored on the CAN B bus. 7 The pneumatic control module with combined functions (A37) locks the vehicle. As long as the transmitter key (A8/1) is located outside the vehicle, this is indicated by the instrument cluster (A1) and the vehicle is not locked When locking, the anti-theft alarm is also activated. Errors occurring when locking are indicated by the instrument cluster.

Convenience locking If the left front door push contact (S47s2) is pressed for t > 1 s the convenience closing function is startedAll windows and the tilting/sliding roof are closed

Obstruction sensor: If a door handle is pulled within 2 s after the vehicle is locked, all power windows are actuated for approx. 2 s in the "opening "direction depending on the version of tilting/sliding roof.

	Transmitter key, task/design/function		GF80.57-P-4101S
	Electronic ignition switch control module, location/task/design/function		GF80.57-P-4102S
	Keyless go control module, location/task/design/function		GF80.61-P-4102SM
	Keyless go antenna, location/task/design/function		GF82.62-P-4100SM